The Characteristics Of This Filtering System Are: 1. Pumping System Made Up Of: • 6 12.5 Hp Motors Saci Brand Model Magnus 2-1250, Or Equivalent Designed To Guarantee The Flow And Pressure Required By The Installation. • Adaptation Of The Existing Suction Manifold In Order To Ensure The Correct Hydraulic Connection With The New Equipment. • Installation Of: O 6 Non-Return Valves Ø140 Mm, With Sets Of Corresponding Flanges. Or 6 Ø125 Mm Butterfly Valves For The Suction System. Or 6 Ø160 Mm Butterfly Valves For The Propulsion System. The Valves Will Allow The Individual Isolation Of Each Line, The Maneuver Control And The Prevention Of Flow Return. The Installation Includes All Necessary Accessories: Flanges, Supports, Adhesives, Strippers And Fasteners. 2. Electrical Control And Protection Panel It Is Planned To Install A New Electrical Control And Protection Panel For The Control Of The 6 12.5 Hp Motors, Sized According To The Installed Power And Current Regulations. A) Cabinet And Enclosure  1 Unit Polyester Cabinet Ip-55, Dimensions 1000X700 Mm Model: Pnz-A/107 Cc T1 – Pinazo Or Similar Intended To House All The Maneuvering And Protection Elements, With A Degree Of Protection Suitable For The Installation Environment. B) General And Differential Protections Or 1 Unit Magnetic Thermal Switch 4P 125A – Eaton (248067) Or Equivalent. General Protection Of The Frame. Or 1 Unit Differential Switch 40A 30Ma 2P (Class Ac) – Eaton (194691) Or Equivalent. Protection Against Indirect Contacts In Auxiliary Circuits. Or 3 Units Differential Switch 40A 300Ma 4P (Class Ac) – Eaton (235412) Or Equivalent. Differential Protection Of Power Lines. Or 2 Units Magnetothermal Switch F+N 10A Curve C – Eaton (194849) Or Equivalent. Protection Of Maneuvering And Control Circuits. C) Engine Starting And Protection System (For Each Engine): For The Individual Control Of The 6 12.5 Hp Engines, The Panel Incorporates: • 6 Progressive Starter Units