Wear Plate, Confirming To Plasser Part No.- 64.08.10185Hs Specification: "Special Des Gned Bi-Metal Wear Resistances Plate Developed By Weld Overlay Process As Per Following Details:- (1)B Ase Material:- The Base Material Will Be Hardox-400 Or Equivalent Material With Following Chemical Co Mposition. Carbon=0.14-0.32%, Chromium=0.30-1.40%, Manganese=1.60% Max, Molybdenum=0.25- 0.60%, Silicon= 0.70% Max, Nickel=0.25 -1.50%. (2)Hardness Of Base Material 370- 420 Bhn. (3)Weld Deposit:- Thickness Of Weld Overlay Deposit Should Be At Least 5 Mm. The Weld Overlay Deposit Will Be Of Enrich Complex Carbide Offering Almost 35-45% Primary Carbides Concentration To Ensure Enhanced Life Of Minimum As Specified At Performance Warranty, With Alloy Basis Of C, Cr, Mn, V, B, Si With Hardn Ess Of 380- 430Bhn. Acceptable Make/Brand: - Plasser Or Equivalent. ]